Ouxi C80 Pro Limited Controller 6A (Red Motor Plug)

Ouxi C80 Pro controller, Red Motor Plug
Ouxi C80 Pro controller, Red Motor Plug, photo 2
Ouxi C80 Pro controller, Red Motor Plug, photo 3
Ouxi C80 Pro controller, Red Motor Plug, photo 4
Sale price 87,-

Ordered before 23:59, delivered tomorrow

  • Easy to install
  • Home delivery across the EU
  • Not happy? Money back, 14-day cooling-off period
  • Fits: C80 Pro
For the red motor plug Wrong colour? Then the plug won't fit.
Step by step How do I check my motor plug colour?

How to check which motor plug colour your fatbike has

All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.

1 minute Just wire cutters No experience needed
  1. Fatbike on its stand, with the motor in the rear wheel

    Go to the rear wheel

    Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.

  2. Cutting the cable tie around a fatbike's motor cable with wire cutters

    Follow the motor cable to the plug

    The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.

  3. Cutting the second cable tie at the motor plug

    Cut the second cable tie too

    Now the plug hangs free and you can get a good grip on it.

  4. Holding a fatbike's motor plug by hand

    Hold the plug on both sides

    Hold it by the thick plug housings, not by the thin wires.

  5. A fatbike's motor plug pulled apart, with the pins visible

    Pull the plug firmly apart

    It's a tight fit, so don't be afraid to pull hard. The plug won't break.

  6. Red inside of a fatbike motor plug with pins

    Look at the inside

    Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.

Done? Push the plug firmly back together (the pins only fit one way) and, if you like, put a new cable tie around it.
For the red motor plug

This controller only fits if the inside of your fatbike's motor plug is this colour. Not sure? You can check it in 1 minute.

Frequently bought together

Customer Reviews

Based on 13 reviews
13 reviews
Stefan van der HeijdenVerified
Going well

The bike shop had it in there in a flash.

miranda van der MeerVerified
What I needed

The cables came out exactly right.

CindyVerified
Quick and neat

Second one I've ordered here.

HarmVerified
Sits well

The controller was well packed.

SergioVerified
Fits perfectly

Connecting it was done in no time, the box was slightly damaged, the product luckily not. Just well handled.

youssefVerified
Would recommend

Same type as the one that was in there.

AnonymousVerified
Riding again

This one fitted where the previous one didn't. I definitely recommend it. Thanks for the help.

Vincent Timmermans
Fine part

The motor runs smoothly again.

astrid P.Verified
Neat product

Fits perfetcly, didn't have to do a thing. All as I wanted.

AstridVerified
Fine product

Replaced without any fuss.

M. El AmraniVerified
Easy to fit

Ordered one for my wife's bike too. The manual was a bit thin though. All good like this for me.

Yvonne Nijland
All good

Swapped in no time, the plugs matched.

Eva CodringtonVerified
Well done

Been in there for a while now . The box was completely intact.

Product information

The benefits at a glance

  • Restricted to 25 km/h
  • 6 km/h throttle
  • Original quality
  • Suitable for: Ouxi C80 Pro with red motor cable
  • Version: 6A, 250W, red motor plug, five connectors including alarm
  • Speed: limited to 25 km/h, 6 km/h walk assist; there is no tunable version for the C80 Pro

The C80 Pro uses its own limited controller with a red motor plug; this is the original replacement part. Once fitted, the C80 Pro runs at 25 km/h again with the throttle working as walk assist.

Do not confuse the C80 Pro with the regular C80 or the C80 Mini: the controllers of those models are different. If your C80 Pro has a black motor plug, this is not the right version. You can replace it yourself: remove the saddle and move five plugs from the old controller to the new one.

Good to know

The controller drives your fatbike's motor and is usually hidden in the frame or under the battery holder. Before disconnecting it, take a photo of the wiring, so you can then connect each plug back in the right place. Always disconnect the battery first before you start. Cannot manage it yourself or in doubt? Message us on WhatsApp at +31 6 82090642 and we will help you out quickly.

Pro tip: lay the new controller next to the old one and compare the plugs one by one, so you can be sure everything matches before you connect it.

WhatsApp chat only. We can't take calls, not even via WhatsApp.

Please note

This controller fits the Ouxi C80 Pro with a red plug. Check that the plug type and the connections match your own controller before you order. In doubt? Message us on WhatsApp at +31 6 82090642 and we will take a look with you.

WhatsApp chat only. We can't take calls, not even via WhatsApp.

Software

Difference between restricted and tunable: it is in the software, not in the number of amps.