Good replacement for the original controller. Neatly handled.
Ouxi V8 Pro 20 inch Limited Controller 21A (Red Plug)




Ordered before 23:59, delivered tomorrow
- Easy to install
- Home delivery across the EU
- Not happy? Money back, 14-day cooling-off period
- Fits: V8 Pro
Step by step How do I check my motor plug colour?
How to check which motor plug colour your fatbike has
All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.
-
Go to the rear wheel
Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.
-
Follow the motor cable to the plug
The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.
-
Cut the second cable tie too
Now the plug hangs free and you can get a good grip on it.
-
Hold the plug on both sides
Hold it by the thick plug housings, not by the thin wires.
-
Pull the plug firmly apart
It's a tight fit, so don't be afraid to pull hard. The plug won't break.
-
Look at the inside
Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.
This controller only fits if the inside of your fatbike's motor plug is this colour. Not sure? You can check it in 1 minute.
Frequently bought together

Customer Reviews
The V8 Pro starts up normally again. Definitely recommended. Big thumbs up.
Fits the V8 Pro without adjusting.
Ordered one for my wife's bike too. The delivery went fine.
It pulls away nicely again.
I wasn't sure about the plug, got good help through the app.
Same type as the one that was in there. There was no mountng hardware included. Arrived neatly.
Fits perfectly, didn't have to do a thng. I got good advice beforehand.
All the connections matched. Clear information on the site.
exactly the same as the original. There was a small scratch on the housing.
My V8 Pro works again.
Product information
The benefits at a glance
- Restricted to 25 km/h
- 6 km/h throttle
- Original part
- Suitable for: Ouxi V8 Pro on 20 inch wheels with a red motor cable
- Version: 21A, 250/500W, red motor plug, 5 cables with alarm connection
- Speed: limited to 25 km/h, 6 km/h with the throttle, cannot be tuned
Limited replacement controller for the Ouxi V8 Pro with 20 inch wheels and a red motor plug. The V8 Pro also comes in a 24 inch version with its own controller, so check your wheel size first before you choose.
With this part the V8 Pro runs at the standard 25 km/h again; if you want to tune, choose the tunable V8/C80 controller. If the plug on your motor cable is black, this red version will not fit. Swapping takes about fifteen minutes: remove the saddle, transfer the five plugs, put the saddle back.
The controller drives your fatbike's motor and is usually tucked away inside the frame. Before you unscrew anything, take a photo of the connections, so you'll know later exactly which connector goes where. With this version, pay attention to the red main connector so everything fits your wiring neatly again. Can't manage it yourself or in doubt? Feel free to message us on WhatsApp at +31 6 82090642, and we'll help you out quickly.
Pro tip: transfer the connectors one by one from the old controller to the new one, so you don't forget any connection.
WhatsApp chat only. We can't take calls, not even via WhatsApp.
This controller is intended for the Ouxi V8 Pro with a red connector. Before you order, check that the connector type and the connections match your own part, to avoid disappointment. In doubt? Just message us on WhatsApp at +31 6 82090642.
WhatsApp chat only. We can't take calls, not even via WhatsApp.
Difference between restricted and tunable: it is in the software, not in the number of amps.





