My son's V20 rides again.
V20 Limited Controller 21A (Red Motor Plug)




Ordered before 23:59, delivered tomorrow
Motor plug colour: Red
- Easy to install
- Home delivery across the EU
- Not happy? Money back, 14-day cooling-off period
- Fits: V20
Step by step How do I check my motor plug colour?
How to check which motor plug colour your fatbike has
All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.
-
Go to the rear wheel
Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.
-
Follow the motor cable to the plug
The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.
-
Cut the second cable tie too
Now the plug hangs free and you can get a good grip on it.
-
Hold the plug on both sides
Hold it by the thick plug housings, not by the thin wires.
-
Pull the plug firmly apart
It's a tight fit, so don't be afraid to pull hard. The plug won't break.
-
Look at the inside
Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.
This controller only fits if the inside of your fatbike's motor plug is this colour. Not sure? You can check it in 1 minute.
Frequently bought together

Customer Reviews
exactly what I was looking for for the V20.
All the connections matched.
Connecting it was done in no time glad it was so simple.
Replaced without any fuss. Fine shop. Hats off.
My neighbour fitted it. Arrived well packed.
No more error message on the display. I did have to swap one little plug over myself. Works just like it should.
No more glitch when pulling away.
Exactly the right controller for the V20.
Fits the V20 without adjusting. Definitely recommended.
Product information
The benefits at a glance
- Restricted to 25 km/h
- 6 km/h throttle
- Original part
- Suitable for: QMWheel V20 and V20 Pro with red motor cable
- Version: 21A, 250/500W, red motor plug, five connection cables
- Speed: limited to 25 km/h (legal), throttle up to 6 km/h, not tunable
Is the controller of your V20 or V20 Pro broken and do you simply want to ride 25 km/h again as the factory intended? Then this is the limited replacement with red motor plug. It works with every H6C display of the V20 series, including the limited NFC version, and changes nothing about the speed.
If you want to tune later after all, choose the tunable 21A version; this limited controller is not suitable for that. Do check the plug colour: a V20 with black motor plug needs the 15A version. You replace it yourself by removing the saddle and moving five plugs over.
The controller is the brain of your fatbike and drives the motor. Before you start, take a photo of how all the connectors are attached, so you can reconnect the new controller in exactly the same way. With this version, pay attention to the color of the main connector (red), so it fits your existing wiring. Can't manage it yourself or in doubt? Feel free to message us on WhatsApp at +31 6 82090642, and we'll help you out quickly.
Pro tip: disconnect and reconnect the connectors one by one, so you avoid forgetting a connection or connecting one wrong.
WhatsApp chat only. We can't take calls, not even via WhatsApp.
This controller is intended for the QMWheel V20 with a red connector. Before you order, check that the connector type and the connections match your own controller, to avoid disappointment. In doubt? Just message us on WhatsApp at +31 6 82090642.
WhatsApp chat only. We can't take calls, not even via WhatsApp.
Difference between restricted and tunable: it is in the software, not in the number of amps.





