Exactly what I was looking for for the Q8.
Ouxi Q8 Limited Controller 21A (Red Motor Plug)




Ordered before 23:59, delivered tomorrow
- Easy to install
- Home delivery across the EU
- Not happy? Money back, 14-day cooling-off period
- Fits: Q8
Step by step How do I check my motor plug colour?
How to check which motor plug colour your fatbike has
All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.
-
Go to the rear wheel
Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.
-
Follow the motor cable to the plug
The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.
-
Cut the second cable tie too
Now the plug hangs free and you can get a good grip on it.
-
Hold the plug on both sides
Hold it by the thick plug housings, not by the thin wires.
-
Pull the plug firmly apart
It's a tight fit, so don't be afraid to pull hard. The plug won't break.
-
Look at the inside
Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.
This controller only fits if the inside of your fatbike's motor plug is this colour. Not sure? You can check it in 1 minute.
Frequently bought together

Customer Reviews
It pulls away nicely again. Friendly help through the app.
Old Controller out, this one in. Glad it was so simple.
Our Q8 runs like it used to again. Definitely recommended.
All the connections matched. The bracket was a bit loose, packed it out myself.
Good replacement for the original controller. Neatly handled. Great service
The bike shop had it in there in a flash. The track and trace was right.
Fits perfectly, didn't have to do a thing. Glad it was so simple.
Product information
The benefits at a glance
- Restricted to 25 km/h
- 6 km/h throttle
- Original part
- Suitable for: Ouxi Q8 with red motor cable
- Version: 21A, 250W, red motor plug, 5 cables with alarm connector
- Speed: limited to 25 km/h, throttle up to 6 km/h; tuning is only possible with the separate Q8 tuning controller
Original limited controller for the Ouxi Q8 with red motor plug. If your Q8 shows error codes or no longer provides any assistance, this part puts it back to the standard 25 km/h with 6 km/h walk assist.
For tuning there is the separate tunable Q8 controller; this limited version stays at 25 km/h. The Q8 2.0 with M5 display and the Q9 use a different controller, so check the type plate carefully. Replacing: remove the saddle, transfer five plugs, no tools needed.
The controller drives the motor of your fatbike. Before replacing it, first take a photo of how all the plugs are positioned, then disconnect the old controller and connect the new one in exactly the same way. Pay attention to the color and shape of each plug so everything ends up in the right place. Can't manage it yourself or in doubt? Feel free to message us on WhatsApp at +31 6 82090642, and we'll help you out quickly.
Pro tip: place the new controller in the same dry spot as the old one and make sure the connections are firmly secured, this way you prevent failures from moisture or a loose plug.
WhatsApp chat only. We can't take calls, not even via WhatsApp.
This controller is intended for the Ouxi Q8 fatbike with the red motor plug. Before ordering, compare the plug and the type with your own controller so you know for sure it will fit. In doubt? Just message us on WhatsApp at +31 6 82090642.
WhatsApp chat only. We can't take calls, not even via WhatsApp.
Difference between restricted and tunable: it is in the software, not in the number of amps.





