Ouxi V8 Original Controller 48V 6A 20 inch (S9F)

Ouxi V8 controller origineel 48V 6A 20 inch S9F, foto 1: bovenaanzicht met stekkers
Ouxi V8 controller origineel 48V 6A, foto 2: typeplaatje V8 S9F
Ouxi V8 controller origineel 48V 6A, foto 3: zwarte module en kabels
Ouxi V8 controller origineel 48V 6A, foto 4: aluminium behuizing zijkant
Sale price 77,-

Ordered before 23:59, delivered tomorrow

  • Easy to install
  • Home delivery across the EU
  • Not happy? Money back, 14-day cooling-off period
Check your motor plug first Not sure if this is the right controller for your fatbike? The tuning guide tells you in 1 minute.
Step by step How do I check my motor plug colour?

How to check which motor plug colour your fatbike has

All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.

1 minute Just wire cutters No experience needed
  1. Fatbike on its stand, with the motor in the rear wheel

    Go to the rear wheel

    Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.

  2. Cutting the cable tie around a fatbike's motor cable with wire cutters

    Follow the motor cable to the plug

    The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.

  3. Cutting the second cable tie at the motor plug

    Cut the second cable tie too

    Now the plug hangs free and you can get a good grip on it.

  4. Holding a fatbike's motor plug by hand

    Hold the plug on both sides

    Hold it by the thick plug housings, not by the thin wires.

  5. A fatbike's motor plug pulled apart, with the pins visible

    Pull the plug firmly apart

    It's a tight fit, so don't be afraid to pull hard. The plug won't break.

  6. Red inside of a fatbike motor plug with pins

    Look at the inside

    Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.

Done? Push the plug firmly back together (the pins only fit one way) and, if you like, put a new cable tie around it.
Check your motor plug first

Not sure if this is the right controller for your fatbike? The tuning guide tells you in 1 minute.

Product information

The benefits at a glance

  • 48V - 6A
  • V8 label (model S9F)
  • Aluminum housing
  • Suitable for: Ouxi V8 on 20 inch wheels with a controller labelled V8, model S9F
  • Version: 48V, rated 6A, brushless DC motor controller, aluminium housing, black module
  • Speed: standard factory setting (limited), not tunable

This is the original 48V controller as Ouxi fits it in the 20 inch V8: model S9F, 6A rated, low-voltage protection at 39V. Compare the label on your current controller; if it says V8 and S9F, this is a one-to-one replacement.

The controller processes the signals from the display, pedal sensor and brakes and drives the motor; if one of those functions fails, this is the part to swap. It is not intended for the V8 Mini on 36V or the V8 Pro on 24 inch, which each have their own original.

Software

Difference between restricted and tunable: it is in the software, not in the number of amps.