Ouxi V8 Ultra Tunable Controller 500W (Red Motor Plug)

Sale price 97,- Regular price 130,- Save 25%

Ordered before 23:59, delivered tomorrow

Build your tuning set
Together
  • Tested on a fatbike before shipping
  • Easy to install
  • Home delivery across the EU
  • Not happy? Money back, 14-day cooling-off period
  • Fits: V8 Ultra, V8 Ultra Max
For the red motor plug Wrong colour? Then the plug won't fit.
Step by step How do I check my motor plug colour?

How to check which motor plug colour your fatbike has

All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.

1 minute Just wire cutters No experience needed
  1. Fatbike on its stand, with the motor in the rear wheel

    Go to the rear wheel

    Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.

  2. Cutting the cable tie around a fatbike's motor cable with wire cutters

    Follow the motor cable to the plug

    The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.

  3. Cutting the second cable tie at the motor plug

    Cut the second cable tie too

    Now the plug hangs free and you can get a good grip on it.

  4. Holding a fatbike's motor plug by hand

    Hold the plug on both sides

    Hold it by the thick plug housings, not by the thin wires.

  5. A fatbike's motor plug pulled apart, with the pins visible

    Pull the plug firmly apart

    It's a tight fit, so don't be afraid to pull hard. The plug won't break.

  6. Red inside of a fatbike motor plug with pins

    Look at the inside

    Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.

Done? Push the plug firmly back together (the pins only fit one way) and, if you like, put a new cable tie around it.
For the red motor plug

This controller only fits if the inside of your fatbike's motor plug is this colour. Not sure? You can check it in 1 minute.


Frequently bought together

Customer Reviews

Based on 5 reviews
5 reviews
Dmytro van der LindenVerified
Neatly handled

On private land it does fine, gave them a call and it was sorted.

Stefan HaddadiVerified
Nicely helped

Handy that it says which plug it is. Now that's what I call service.

Xander El IdrissiVerified
Pretty much great

Fits perfectly, didn't have to do a thing. There was a small scratch on the housing

Joost HaddadiVerified
Works

Worked right away after connecting, the delivery went quickly.

Bob HuismanVerified
Sorted quickly

Fits the V8 Ultra as described. My question was answered quickly.

Product information

The benefits at a glance

  • Tunable up to 50 km/h
  • Restricted: 6 km/h throttle
  • 5 cables, with alarm
  • Suitable for: Ouxi V8 Ultra and V8 Ultra Max with red motor cable
  • Version: 500W, red motor plug, 5 connection cables with alarm connection
  • Speed: up to 50 km/h tuned on private terrain, delivered limited to 25 km/h

V8 Ultra and V8 Ultra Max share the same 500W motor with red plug, so this one controller covers both models. Paired with a tunable display with killswitch the Ultra goes up to 50 km/h; with the killswitch you set it back to 25 km/h on the go.

For the V8 Ultra Mini this is not the right controller: it runs on 36V and has a different version. Also check the colour of your motor plug; black means a different model. Replacing it needs no experience: the saddle comes off and five plugs go over. Riding tuned is only allowed on private or closed-off terrain, away from public roads.

Good to know

Fitting a new controller on your Ouxi V8 Ultra is actually very simple: there are only 5 cables you need to connect. Still not working out? Feel free to message us on WhatsApp at 06 82090642 and we will help you quickly.

Pro tip: take the saddle off the bike first, so you can easily reach the controller to replace it.

WhatsApp chat only. We can't take calls, not even via WhatsApp.

Please note

Important: this controller is intended for the Ouxi V8 Ultra / V8 Ultra Max and only works in combination with a red motor cable. Do you have a different fatbike model? Then you need a controller that matches it. On our site you will find the right controller for your model.

Software

Difference between restricted and tunable: it is in the software, not in the number of amps.

Ouxi V8 Ultra tunable controller: 50 km/h on private property

The Ouxi V8 Ultra combines a 500W motor with a rotation sensor, NFC locking and a built-in alarm. This controller drives that motor. It has a red motor plug and is tunable up to 50 km/h. Use it to replace a faulty or damaged controller.

You order it at FatbikeKlaar.nl; you order the same part via FatbikeKlaar.be from Belgium and via FatbikeKlaar.com in English.

Which bike is this controller for?

This controller belongs to the Ouxi V8 Ultra. That bike runs on a removable 48V / 15Ah / 720Wh battery and reaches up to 80 km on the lowest assistance. It has front and rear suspension, a long saddle for two people and weighs 40 kg. The V8 Ultra shares its base with the Ouxi V8 Ultra Max, which rides on two batteries. The controller only works with a red motor cable.

What does the controller do?

The controller distributes the power from the battery to the motor. It regulates how much assistance you get based on your pedalling and the throttle. So you notice a faulty controller straight away in how the bike rides.

Features

  • Motor plug: red, only for a red motor cable.
  • Version: 500W.
  • Speed: tunable up to 50 km/h.
  • Restricted: throttle up to 6 km/h.
  • Connections: 5 cables, with alarm.

Tuning: what is possible and what is allowed

Tuned, the V8 Ultra reaches 50 km/h with this controller. Tuned riding is only allowed on private or enclosed property; on public roads a maximum of 25 km/h pedal assist applies. In the V8 family you tune with a tunable controller or with a tunable display with kill switch. For the V8 Ultra, the tunable M5 display and the tunable HC80 display with NFC are available separately. With the kill switch you set the bike back to 25 km/h. If you bought the Tunable version, the tuning parts were already included and this controller is a spare part. The guide tuning the Ouxi V8 explains the choice between controller and display.

Fitting in a few steps

Replacing the controller is easy: there are only 5 cables.

  • Switch the bike off and take the battery out of the frame.
  • Take the saddle off the bike, so you can easily reach the controller.
  • Connect the 5 cables of the new controller.
  • Check that the plug to the motor is red.

Stuck? Message us on WhatsApp at 06 82090642 and we will think along with you.

Warranty and delivery

In the Netherlands: ordered before 23:59, delivered tomorrow. Delivery to Belgium and Germany is also possible. This controller has a 2-year warranty. So check before you order that the part matches your own part. Answers to questions about ordering can be found in the frequently asked questions.

Parts that fit the V8 Ultra

  • Displays: the tunable M5 or HC80 display from the tuning section.
  • Controllers: compare all models under controllers.
  • Tuning kits: everything for tuning is under tuning kits.
  • Ouxi parts: replacement parts for Ouxi fatbikes can be found under Ouxi parts.

Not sure what fits? Use the product finder.

Frequently asked questions about the Ouxi V8 Ultra controller

Which plug colour does this controller have?

A red one. The controller only works in combination with a red motor cable. Check this on your bike before you order.

Can I ride tuned on public roads?

No. Tuned riding up to 50 km/h is only allowed on private or enclosed property. On public roads pedal assist remains restricted to 25 km/h.

Can I fit the controller myself?

Yes. Switch the bike off, take the saddle off and connect the 5 cables. Need help? Send a WhatsApp message to 06 82090642.

Do I need this controller with the Tunable version?

No. With that version the tuning parts are already included. This controller is then a spare part for later.

About the tunable Ouxi V8 Ultra controller

Please note: tuning is only intended for use on private or enclosed property. On public roads in the Netherlands and Belgium, a maximum of 25 km/h applies.

This tunable controller belongs to the Ouxi V8 Ultra with a red motor plug, in the 500W version. It replaces a faulty or damaged controller as an original part and was developed with the latest software. It is supplied restricted, with a throttle up to 6 km/h. It has 5 connections with alarm, which you connect yourself. The controller comes in compact packaging.

Specifications

  • Brand: Ouxi
  • Suitable for: Ouxi V8 Ultra, Ouxi V8 Ultra Max
  • Motor plug: red
  • Version: 500W
  • Connections: 5 cables, with alarm
  • Supplied: restricted, throttle up to 6 km/h
  • Tunable: up to 50 km/h, only on private or enclosed property
  • Item number: FBK-CTR-V8ULT-OV-RD-01

Fits

  • Ouxi V8 Ultra with a red motor cable
  • Ouxi V8 Ultra Max with a red motor cable

Does not fit

  • Bikes with a black motor cable.
  • Other fatbike models: choose the controller that belongs to your model.

Questions about this product

Is this controller enough to tune the V8 Ultra?

No. For the V8 you always need both a tunable display and a tunable controller. You can see which display fits in the tuning guide.

Does this controller fit another V8 version?

This controller is made for the Ouxi V8 Ultra with a red motor cable. For a different model, choose the controller that matches it.

How soon will I receive the controller?

In the Netherlands: order before 23:59, delivered tomorrow. From €150 we ship parts free of charge to the Netherlands, Belgium and Germany.

Can I exchange the controller?

To exchange, first contact us via WhatsApp at +31 6 82090642. You pay for the return shipment.

What if the controller arrives damaged or is the wrong one?

Report damage or a wrong delivery as soon as possible via WhatsApp at +31 6 82090642, with photos.