Ouxi V8 Pro Original Controller 48V 26A 24 inch

Ouxi V8 Pro controller origineel 48V 26A 24 inch, foto 1: bovenkant met stekkers
Ouxi V8 Pro controller origineel 48V 26A, foto 2: typeplaatje V8 PRO
Ouxi V8 Pro controller origineel 48V 26A, foto 3: zwarte module en kabelboom
Ouxi V8 Pro controller origineel 48V 26A, foto 4: zijkant aluminium behuizing
Sale price 67,-

Ordered before 23:59, delivered tomorrow

  • Easy to install
  • Home delivery across the EU
  • Not happy? Money back, 14-day cooling-off period
Check your motor plug first Not sure if this is the right controller for your fatbike? The tuning guide tells you in 1 minute.
Step by step How do I check my motor plug colour?

How to check which motor plug colour your fatbike has

All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.

1 minute Just wire cutters No experience needed
  1. Fatbike on its stand, with the motor in the rear wheel

    Go to the rear wheel

    Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.

  2. Cutting the cable tie around a fatbike's motor cable with wire cutters

    Follow the motor cable to the plug

    The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.

  3. Cutting the second cable tie at the motor plug

    Cut the second cable tie too

    Now the plug hangs free and you can get a good grip on it.

  4. Holding a fatbike's motor plug by hand

    Hold the plug on both sides

    Hold it by the thick plug housings, not by the thin wires.

  5. A fatbike's motor plug pulled apart, with the pins visible

    Pull the plug firmly apart

    It's a tight fit, so don't be afraid to pull hard. The plug won't break.

  6. Red inside of a fatbike motor plug with pins

    Look at the inside

    Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.

Done? Push the plug firmly back together (the pins only fit one way) and, if you like, put a new cable tie around it.
Check your motor plug first

Not sure if this is the right controller for your fatbike? The tuning guide tells you in 1 minute.

Product information

The benefits at a glance

  • 48V - max. 26A
  • V8 PRO label
  • Aluminum housing
  • Suitable for: Ouxi V8 Pro with 24 inch wheels, label V8 PRO
  • Version: 48V, maximum 26A, brushless DC motor controller, low-voltage protection 39V
  • Speed: original factory setting, limited

Original 48V controller for the 24 inch V8 Pro, with 26A maximum current and label V8 PRO. The larger wheels need a different setting than the 20 inch V8, hence this separate part.

The label on your current controller must say V8 PRO; if it does, this unit replaces it without any modifications. The controller drives the motor based on the display, pedal sensor and brakes. Replacing is done under the saddle, five plugs over, done.

Software

Difference between restricted and tunable: it is in the software, not in the number of amps.