V20 Pro Skinny Bike Tunable Controller 21A (Red Plug)

QMWheel V20 Pro Skinny Bike tunable controller 21A with red motor plug (photo 1)
QMWheel V20 Pro Skinny Bike tunable controller 21A with red motor plug (photo 2)
QMWheel V20 Pro Skinny Bike tunable controller 21A with red motor plug (photo 3)
QMWheel V20 Pro Skinny Bike tunable controller 21A with red motor plug (photo 4)
Sale price 97,- Regular price 130,- Save 25%

Ordered before 23:59, delivered tomorrow

Build your tuning set
Together
  • Tested on a fatbike before shipping
  • Easy to install
  • Home delivery across the EU
  • Not happy? Money back, 14-day cooling-off period
  • Fits: V20 Pro Skinny Bike
For the red motor plug Wrong colour? Then the plug won't fit.
Step by step How do I check my motor plug colour?

How to check which motor plug colour your fatbike has

All you need is a pair of wire cutters and it takes a minute. The colour is on the inside of the motor plug, so you'll need to pull it apart. That's fine: it won't damage the plug.

1 minute Just wire cutters No experience needed
  1. Fatbike on its stand, with the motor in the rear wheel

    Go to the rear wheel

    Put your fatbike on its stand. The motor is in the rear wheel, and one thick cable comes out of it: the motor cable.

  2. Cutting the cable tie around a fatbike's motor cable with wire cutters

    Follow the motor cable to the plug

    The motor cable runs along the frame to the first plug. It's usually held in place with two cable ties. Cut the first one.

  3. Cutting the second cable tie at the motor plug

    Cut the second cable tie too

    Now the plug hangs free and you can get a good grip on it.

  4. Holding a fatbike's motor plug by hand

    Hold the plug on both sides

    Hold it by the thick plug housings, not by the thin wires.

  5. A fatbike's motor plug pulled apart, with the pins visible

    Pull the plug firmly apart

    It's a tight fit, so don't be afraid to pull hard. The plug won't break.

  6. Red inside of a fatbike motor plug with pins

    Look at the inside

    Where the pins stick out you'll see the colour: red or black. That's your motor plug colour.

Done? Push the plug firmly back together (the pins only fit one way) and, if you like, put a new cable tie around it.
For the red motor plug

This controller only fits if the inside of your fatbike's motor plug is this colour. Not sure? You can check it in 1 minute.

Frequently bought together

Customer Reviews

Based on 5 reviews
5 reviews
AnonymousVerified
Recommended

All the connections matched. A bit of searching for which one I needed. The service was friendly.

Olena HofmanVerified
Good replacement

Worked right away after connecting. Glad it was so simple . Hats off.

CasperVerified
Quick delivery

Exactly the right controller for the V20 Pro Skinny.

Stefan V.
Clear

Works right away on my V20 Pro Skinny.

Stefan WoltersVerified
Everything was right

At the campsite the V20 Pro Skinny rides fine now.

Product information

The benefits at a glance

  • Tunable up to 45 km/h
  • Restricted: 6 km/h throttle
  • 5 cables, no alarm
  • Suitable for: QMWheel V20 Pro Skinny Bike (narrow tyres) with red motor cable
  • Version: 21A, 500W, red motor plug, 5 cables without alarm connector
  • Speed: tunable up to 45 km/h off public roads, delivered limited

The Skinny Bike is a V20 Pro on narrow tyres; the motor and the red motor plug are identical to those of the regular V20 Pro. This controller therefore delivers exactly the same control and reaches 45 km/h together with a tunable H6C display with killswitch.

Without a tunable display nothing changes about the speed: the controller is delivered limited and then stays at 25 km/h. If your Skinny Bike has a black motor plug, this model does not fit; do the Colour Check before you order. Fitting: remove the saddle, move five plugs over.

Good to know

Fitting a new controller on your QMWheel V20 Pro Skinny Bike is actually very simple: there are only 5 cables you need to connect. Still not working out? Just message us on WhatsApp at 06 82090642 and we will help you out quickly.

Pro tip: take the saddle off the bike first, that way you can easily reach the controller to replace it.

WhatsApp chat only. We can't take calls, not even via WhatsApp.

Please note

Important: this controller is intended for the QMWheel V20 Pro Skinny Bike and only works in combination with a red motor cable. Do you have a different fatbike model? Then you need a controller that matches it. On our site you will find the right controller for your model.

Software

Difference between restricted and tunable: it is in the software, not in the number of amps.

QMWheel V20 Pro Skinny Bike tunable controller: red motor plug, 500W

If you ride the QMWheel V20 Pro Skinny Bike, you need a controller that matches the motor. This tunable controller has a red motor plug and delivers 500W. It arrives restricted and can be tuned up to 45 km/h on private property.

You can order through FatbikeKlaar.nl; from Belgium you can do so through FatbikeKlaar.be and in English through FatbikeKlaar.com.

Which bike is this controller for?

The controller is intended for the QMWheel V20 Pro Skinny Bike. That is the V20 Pro on narrow 20 inch tyres, with disc brakes, front suspension and a 48V / 15Ah / 720Wh battery. Tuning works the same way as on the QMWheel V20 Pro.

You need it if your old controller is faulty or damaged, or if you want to tune a restricted Skinny Bike later. If you order the bike in the Tunable version, the controller is already included and you do not need to buy it separately.

What the controller does

The controller distributes the current from the battery to the motor. That is how it determines how strongly and up to what speed the motor assists.

Specifications

  • Motor plug: red, not suitable for a black plug.
  • Power: 500W.
  • Connections: 5 cables, no alarm connection.
  • Restricted as standard: throttle up to 6 km/h as walk assist.
  • Tunable: up to 45 km/h.

Restricted on the cycle path

When restricted, the Skinny Bike remains an electric bike with pedal assist up to 25 km/h. That way you ride legally on cycle paths and in town without a driving licence or number plate. That is where the narrow tyres come into their own, as they roll easily on tarmac.

Tuning: what is possible and what is allowed

To tune up to 45 km/h, you combine this controller with the tunable H6C display. You activate the higher speed with a tuning code. With the kill switch you go back to 25 km/h: hold two buttons for about 3 seconds. You will find more explanation in the article Tuning the QMWheel V20 to 45 km/h and separate parts in the tuning kits. Riding tuned is only allowed on private or enclosed property; on public roads a maximum of 25 km/h pedal assist applies.

Fitting

You reach the controller most easily if you first remove the saddle from the bike. Then you connect 5 cables. Take a photo of the old connections beforehand, so you can see exactly which plug goes where. After fitting, test in restricted mode first. Can't work it out? Send us a WhatsApp message at 06 82090642.

Warranty, delivery and service

Parts come with a manufacturer's warranty, and if there are problems we will think along with you. In the Netherlands, an order placed before 23:59 is delivered tomorrow. We also deliver to Belgium and Germany. The part comes in compact packaging.

Matching parts for the Skinny Bike

  • Tunable display: the H6C display above, needed for tuning and the kill switch.
  • Tyres: the Skinny Bike runs on narrow 20 inch tyres; check the size in the tyres section.
  • Battery: note 48V / 15Ah / 720Wh and then look at the batteries.
  • More parts: controllers, displays and other parts for the QMWheel family are in V20 Parts.

Advice and product finder

In the product finder you can see per model which tunable controller and which display fit. Answers about ordering, delivery and warranty can be found in the frequently asked questions. Prefer direct contact? Message us at 06 82090642.

Frequently asked questions about the Skinny Bike controller

How do I know whether my Skinny Bike has a red motor plug?

Look at the plug in the cable between the motor and the controller. If it is red, this controller fits. With a black plug you need a different type.

Do I also need a different display?

For tuning, yes. With the tunable H6C display you activate the higher speed with a code and switch back with the kill switch.

Am I allowed to ride tuned on the cycle path?

No. Riding tuned is only allowed on private or enclosed property. On the cycle path and public roads you ride restricted to 25 km/h.

Is the controller delivered fitted?

No, you receive it as a separate part. You first remove the saddle from the bike and then connect 5 cables. Need help? Send us a WhatsApp message.

About the QMWheel V20 Pro Skinny Bike controller with red motor plug

Please note: tuning is only intended for use on private or enclosed property. On public roads in the Netherlands and Belgium, a maximum of 25 km/h applies.

This is a separate tunable controller for the QMWheel V20 Pro Skinny Bike, in the 500W version. It only works with a red motor plug, has 5 connections without alarm and is supplied restricted, with a throttle up to 6 km/h. You fit it yourself. For tuning the V20, you always need both a display and a controller: this controller together with the tunable H6C display.

Specifications

  • Suitable for: QMWheel V20 Pro Skinny Bike
  • Brand: QMWheel
  • Motor plug: red
  • Version: 500W
  • Connections: 5, without alarm
  • Delivery: restricted, throttle up to 6 km/h
  • Tunable: up to 45 km/h, only on private or enclosed property
  • Item number: FBK-CTR-V20PROSKN-OV-RD-01

Fits

  • QMWheel V20 Pro Skinny Bike with a red motor plug

Does not fit

  • A bike with a black motor plug
  • Other fatbike models: choose the controller that matches your model

In the box

  • The controller as a separate part, in compact packaging

Questions about this product

Does this controller also fit another model?

No, it is made for the QMWheel V20 Pro Skinny Bike with a red motor cable. For a different model, choose the controller for that model.

Is this controller enough for tuning?

No. For tuning the V20, you always need both a display and a controller: this controller with the tunable H6C display.

Does this controller have an alarm connection?

No, it has 5 connections without alarm.

When will I receive the controller?

In the Netherlands: order before 23:59, delivered tomorrow. We ship parts free of charge to the Netherlands, Belgium and Germany from €150.

What warranty do I get on this controller?

The controller has a 2 years warranty. If something is wrong, contact us via WhatsApp: +31 6 82090642.